Business profile
Loading canonical business information.
About
Services
Products
Articles & research
Offers
Published by the business. Confirm current availability and terms with the business.
Browse productsPromotions
Published by the business. Confirm current availability and terms with the business.
Browse productsFrequently asked questions
Answers published by the business.
Published agent capabilities
Capabilities recorded in this listing. Their presence is not a live availability check.
AI-readable discovery
Read the structured business information and inspect the published discovery documents.
Machine-readable documents do not by themselves establish a live AI agent, checkout or business ownership.
Request a quote
Loading quote availability…
Sources
Report this listing
Tell us what needs reviewing. Removal requests are reviewed before any change is made.
Request removalProfile information
Publication, owner access and business registry verification are separate. Verification badges describe the checks completed; public references identify this listing.
Structured public business summary
Modern Device
Specialty Electronics For Any Project.
Global
Business nature
- Primary business nature
- Not provided
- Customer market
- Not provided
Operating hours
Hours not provided.
Categories
- Construction & Trades (primary)
Products
- AC Current Sensor — The Modern Device AC current sensor is an absolutely unique, easy-to-use, electrically isolated current sensor for AC mains voltages (120/240 volts AC). Just zip-tie the sensor to a power cord, and safely read the current proportional to the DC output. The sensor only has three connections 3.3 or 5 volts, GND and the linear voltage output that goes directly into a microcontroller ADC (analog pin). With the sensor being entirely isolated from the AC line cord, the Modern Device Current Sensor is a safe and easy way to sense current with an Arduino or other microcontroller with no fuss. The current sensor can distinguish as little as 2 watt loads at 120 volts, which means that it can sense a change in current of AC current of about 16 mA. The output is just an analog voltage which is proportional to the current sensed. If you are looking for absolute values of current you will need to do a little calibration: this is as easy as applying two loads, hopefully a light load and a much heavier load, and just averaging between the load points. As our testing shows, the sensor really does have impressive linearity. How does it work? It theory you shouldn't be able to sense a current from two AC carrying wires in close proximity. This is because the magnetic fields from the two, 180 degree out-of-phase, power conductors should cancel one another. If you've ever used an AC clamp (current) meter, you know that it is important to put only one conductor inside the clamp. Putting both conductors inside the clamp meter will result in a zero, or very low reading as the fields cancel. The trick the Modern Device Current Sensor uses is getting the two separate hall elements as close as possible to a cables separate conductors, one sensor closer to one wire and the other sensor closer to the other (out of phase) conductor. Applying hall effect sensors which incorporate chopper op amps for high gain, the current sensor then reads the two hall sensors deferentially, which amplifies the difference voltage generated between the two sensors. The sensor can also work well for sensing current in only one wire (hot or neutral) alone if you wish to use it that way, but you will need to orient the wire over only one of the hall effect sensors on the board. Simple calibration It is important to note that the actual curve you will get (but not its linearity) is influenced by the geometry of your wire and the sensor's position in relationship to the wire. For maximum sensitivity adjust the sensor's position on the wire while monitoring the output for maximum response. The potentiometer on the board can also be used to adjust the gain by a power of about 3. A sketch in the blog posts below explains a very quick and simple methods for calibrating the sensor, which only requires gathering two data points. The sensor ships with two small zip ties that can be used to secure the sensor to a line cord, extension cord or power strip, and a 3 pin male header. In some cases you may want to add a drop of hot glue to keep the sensor locked to the wire in a stable configuration. A separate dropdown menu item has extra zip ties available. Current Sensor Specifications VCC Sensor Measured Watts / Amps Output Voltage Range Sensor Current 3.3V 2 watts to 3000 watts .05V to 2.8V 11 mA 5V 2 watts to 3000 watts .05V to 4.5V 16 mA Resources An Arduino sketch for using the Modern Device Current Sensor Blog post on the current sensor Blog post on calibrating the current sensor Blog post the current Sensor at 3.3 volts Modern Device Current Sensor Schematic Modern Device Current Sensor dimensions pdf Modern Device Current Sensor.dxf(zipped)
- Fluxamasynth Shield v.3 — This is an updated version of the 64 voice polyphony synth shield for Arduino. Note that previous versions of the shield used the SAM2195 chip from Dream Sound Synthesis; since they discontinued that product we updated the Fluxamasynth to use the SAM2695. Version 3 of the shield has a few more parts but has much better filtering and a neat microphone input. We also added an optional 5-pin DIN jack and MIDI-spec circuit for MIDI Thru (see variants). The Fluxamasynth is a programmable synthesizer in an Arduino-friendly shield form factor. When I first showed it to Paul his reaction was “you’ve got an embarrassment of riches there.” and he’s right. The SAM2695 was intended for battery powered keyboards or portable Karaoke machines, but I’m sure you can use and abuse the Fluxamasynth in all sorts of new and interesting ways. Here are a few suggestions: Make your own MIDI instrument with unconventional analog sensors Create algorithmic compositions Use it in a homebrew pinball machine to generate music and sound effects Build an unusual percussion device Augment an analog instrument with a Fluxamasynth-based hyperinstrument The example code shows an example of scoring a long composition for the Fluxamasynth: an implementation of In C by Terry Riley. The Fluxamasynth has a built-in wavetable with 128 general MIDI sounds and an additional set of 128 variations and dozens of percussion sounds. It can play music in 64-voice polyphony without effects or 38 voices with effects. Here are some additional features: 64-voice polyphony (without efffects) 32-voice polyphony with effects 14 bits of pitch bend range Access to fine and coarse tuning in cents Access to low level wavetable parameters Stereo line level output Master volume and per-channel volume control 4-band Equalizer Chorus, flange, delay effects 8 Reverb effects Spatial effects The ATSAM2695 chip that does all the work is hooked up to the serial transmit (TX) line of the microcontroller; making music is as easy as sending a set of MIDI-formatted bytes to a software serial port on pin 4. You can program the Fluxamasynth with the Arduino IDE and the Modern Device Fluxamasynth library. See the Quick Start guide for a complete example. You’ll need an Arduino, Freeduino, BASIC STAMP or some other microcontroller to use with this shield, there are many in the shop, see our new Educato if you like to solder. The Fluxamasynth comes with loose headers, pre-soldered headers are optional. Please note that the option without the MIDI Jack does not come with any of the additional components. Other resources: Fluxamasynth library for Arduino IDE; supports Arduino boards, ESP32, and Feather variations Fluxamasynth Library Reference Quick start guide The latest version of the Fluxamasynth library on Github ATSAM2695 datasheet PDF of the board design PDF of the schematic A link to a users site that parses midi files and a nice video Please be aware: Due to current fluctuations in part availability, lead times may vary on certain products
- Pulse/Heartbeat Sensor — This is a heartbeat / pulse / PSO2 sensor based on a Silicon Labs Si1143 chip. The chip wasn't exactly designed for a pulse sensor but since we developed this sensor Silicon Labs has gone on to market the chip for that application, and it is used in several commercial applications. These include variable LED control for three LEDs and two photodiode detectors. The chip has a boatload of controls for controlling the LED pulsewidth, the LED current and which LEDs are on during which particular measurement. We've got a library for the sketch and demos for Arduino and Processing. The board is outfitted with two infrared LEDs and one red LED, for sensing of visible red light. The two frequencies are necessary for sensing and calculating the oxygen saturation in blood. The pinout can easily be connected with wires to any Arduino or other microcontroller. The pulse sensor, with only slightly tweaked software, also makes an awesome close range (0-8") infrared proximity detector. Unlike the Sharp infrared sensors, the SI1143 based sensor has no dead zone close in the output. The current draw is also less than the Sharp sensor, and entirely under user control, through the I2C interface. Note that competing pulse sensors which typically use one op amp, have no software control over the LED, or sensor sensitivity at all. Specifications 1.26" x .8" (32mm x 22mm) Resources SI1143 Datasheet Schematic Library and examples on Github Blog post by customer Tom Boyd using the sensor
- Reverbalizer: Hackable FV-1 Based Multi-effects Module — The Reverbalizer is a hackable electronic multi-effects module for mobile and microcontroller applications. It is hackable in two ways. First, you can adapt it for use in a microcontroller project. Second, you can download or create additional DSP effects and install it on an EEPROM cartridge using an Arduino-based program we developed. It comes with 8 effects in ROM and 8 on the re-programmable cartridge. The Reverbalizer uses the FV-1 DSP chip from Spin Semiconductor. The chip was designed by Alesis founder Keith Barr and appears in many effects units like the Z-DSP. The built-in effects are: Chorus-reverb Flange-reverb Tremolo-reverb Pitch shift Pitch-echo Test (straight through) Reverb 1 Reverb 2 There's a quick start guide that explains more at Getting Started with the Reverbalizer Here are a few samples made using the output Bytebeat Shufflebox for Arduino fed into the Reverbalizer. Here's an example of vocal artist Laurie Amat taking the Reverbalizer for a spin: Here are two examples from Feral Vocaloid: Documentation and Links Spin Semiconductor's FV-1 product page The datasheet Spin's free DSP programs to download to your EEPROM Windows Spin ASM IDE for programming your own DSP effects SpinCAD Designer IDE for programming DSP effects (Java-based) A nice review of the FV-1 in Tone Report Other products using the FV-1: Z-DSP's Numberz Molecular Disruption Device
- Wind Sensor Rev. C — Quantity Pricing QTY EXT PRICE 1-24 $21.95 25-49 $19.76 50-99 $17.78 100-249 $16.90 250+ $15.37 Description We are excited to offer the first small, affordable air flow sensor suitable for electronic experiments and integrated applications alike. The Wind Sensor Rev. C is a low-cost anemometer with an analog output, designed for use with electronic projects. It is a thermal anemometer based on a traditional method for measuring wind speed called “hot-wire”. This technique involves heating an element to a constant temperature and then measuring the electrical power that is required to maintain the heated element at temperature as the wind changes. The wind velocity is proportional the heat (i.e. power) applied to the sensor. The hot wire technique excels at low to medium wind speed, and is the preferred technique for sensing indoor air movement, where the spinning cup anemometers typically seen on weather stations are ineffective. As an experimenters tool, the sensor is exquisitely sensitive, with a small puff of air being sensed at a distance of 18-24". Possible applications include human breath detection, room occupancy detection, HVAC system monitoring, weather stations and many more. It has five pins, three signal pins plus power and ground. Below is a chart of the pins functions. The latest version of the sensor, with a more accurate op amp, runs fine between four and five volts, but it will not work at higher voltages. The Arduino calibration sketch (link below) is premised on a regulated five volt supply, so the sketch won't work accurately at other voltages. If higher levels of precision and stability are required, take a look at the Wind Sensor Rev. P. The Rev C Wind Sensor is now available through our UK-based partner Digital Smarties. EU customers can order them here. Specifications Dimensions: .68″ × 1.590″ × .25″ Supply Voltage: 4 – 5 volts (4-10 volts previously) Supply current: 20 – 40 mA (depending on wind speed) Output signal: analog, 0 to VCC Useful wind velocities 0-60 mph Technical Notes The sensor can be switched off to save power, but at start-up needs to be allowed to warm up about 10 seconds to thermally stabilize for best accuracy. This time interval allows the sensing thermistor to heat up to operating temperature. It’s probably also not a good idea to hang the sensor power supply off a microcontroller pin, even an Atmel pin, if best accuracy is a concern, as the sensor draws a bit of current (~25 mA) and the current will also fluctuate with wind speed. The Wind Sensor includes a small trimpot that is used to calibrate the sensor for zero wind. Calibration is simple. Simply put a glass over the sensor to block any breeze and adjust the pot for the desired zero level. We calibrate the sensors roughly for .5V of output at zero wind with a six volt supply, but you are free to calibrate as desired. A lower calibration point, say .2 V will result in a little more sensing capability at the high end. Using a higher voltage supply will require recalibration. Do not use supplies higher than about 10 volts. A regulated supply is highly recommended. Pinout GND Ground +V Power 5 volts regulated voltage for best results Out Output voltage. This is the voltage at RV multiplied by about three and shifted by the setting on the potentiometer. This output voltage will saturate (hit Ground or +V) if the ambient temperature changes much from the temperature when the sensor was calibrated. The sensitivity of this output can be changed by by swapping out R11. Higher sensitivity will make the sensor saturate more easily with ambient temperature change. RV This is the raw loop voltage and the output to use for calibrated output. it will not saturate. It won't go below about 1.8 volts at room temperature either. This voltage is not affected by the calibration potentiometer. The output of the sensor is logarithmic, which means the sensor can capture very slight air movements at the low end, but also not saturate at full output
- Wind Sensor Rev. P — Quantity Pricing QTY EXT PRICE 1-24 $39.95 25-49 $35.96 50-99 $33.29 100-249 $30.76 250+ $27.97 Description The Rev. P6 wind sensor is the latest revision of our wind sensor, revised to increase stability and accuracy. We also added a high precision potentiometer to allow easier calibration. All boards are calibrated in the shop, so the potentiometer shouldn't need to be changed by the user, although it's there to experiment with if you so desire. The Rev. P wind sensor is an improved hot wire anemometer, similar to our Rev C wind sensor, but including hardware compensation for ambient temperatures. The P refers to positive temperature coefficient thermistors that are used in this model. These thermistors are more stable and more absolutely accurate than the thermistors on the Rev C. These thermistors require a higher voltage to heat the sensing element to operating temperature. Thus the sensor needs an 9-12 volt supply. One pleasant side-effect of this increased voltage is that there is plenty of power to heat up the thermistor, so the sensor can sense hurricane force winds without saturating (going to a flat maximum value). (It does not necessarily mean the sensor can survive being in hurricane, apologies storm hunters). The new mounting of the thermistor sensing element means that the Rev P is much less directionally sensitive than the Rev C. sensor, closer to the 15% range. The sensor is physically more robust than our older sensor due to the loop that holds the sensing element. Another new feature of the sensor is a dedicated ambient temperature sensor that is independent of supply voltages. The temp sensor analog output is also scaled to 3.3 volts. The voltage (wind) output of the sensor has also been scaled to a maximum 3.3V output with high precision (.1% resistors). This is to accommodate the increasing use of 3.3 volt boards, and microcontrollers. It works great with any Arduino or clone, right out of the box, however you need to provide at least 9-12 volts from an external power source, with 12 volts being ideal. For a less expensive alternative, check out the Wind Sensor Rev. C The Rev P Wind Sensor is now available through our UK-based partner Digital Smarties. Non-US customers can order them here. Specifications: Supply voltage: 10-12 volts Current: ~40mA - increases a bit with higher wind speeds Wind Speeds Measured: 0-150 MPH Ambient temperature compensation Resources Calibrating the Wind Sensor Rev. P Blog Post Wind Sensor Rev. P6 schematic Wind Rev P5-P6 Dimensions(pdf) Wind Sensor Rev P Arduino sketch Wind Sensor Rev P Outline file dxf zipped Please be aware: Due to current fluctuations in part availability, lead times may vary on certain products
Public contacts
- Public phone: 21.95 25-49
- github: https://github.com/moderndevice/Wind_Sensor
- github: https://github.com/moderndevice/CurrentSensor
- github: https://github.com/fluxly/Fluxamasynth
- github: https://github.com/moderndevice/Fluxamasynth-Shield
- github: https://github.com/moderndevice/SI1143_Pulse-Prox_Sensors
Declared AI capabilities
- Online checkout — Detected from public website navigation or discovery metadata.
- Online support — Detected from public website navigation or discovery metadata.
Directory status
Registry verification: Not Registry Verified
Directory score: 83
Public source evidence
- Modern Device
- Pulse/Heartbeat Sensor – Modern Device
- Fluxamasynth Shield v.3 – Modern Device
- Wind Sensor Rev. P - Low Cost Anemometer | Modern Device
- All Products – Modern Device
- Current Sensor | Modern Device
- Reverbalizer: Hackable FV-1 Based Multi-effects Module – Modern Device
- Wind Sensor Rev. C – Modern Device